Protege EliteSuite Eclipse Installationshandbuch PDF herunterladen (Seite 33)

13.3ZoneOpons

The Zone Opons select funcons that relate to the operaon of Bypassing, Force Arming and Stay

Arming.

Step 1

Once you have selected a Zone (refertosecon13.1) and Zone Type (refertosecon13.2), you

must select the Zone Opons.

Step 2

To toggle zone opons press the keys 1 to 8, and the corresponding number LED will be lit when

that opon is enabled.

Step 3

Pressing the MENU key ( ) will abort the operaon without saving any changes. Pressing the

ENTER key ( ) will save the opons then loop back to the Zone Selecon procedure so another

zone can be congured. Once all zones have been congured press the MENU key ( ) to perform

other menu acons or the CLEAR key ( ) to exit the menu system.

The available opons are:

Opon 1 - Bypass Allowed

• Enabled, the zone can be bypassed. A re zone can never be bypassed regardless of the bypass

seng.

• Disabled, zone can not be bypassed.

Opon 2 - Stay Zone

• Enabled, the zone is set as a Stay zone. When the system is armed in stay mode this zone will

not generate an alarm.

• Disabled, the zone is not a Stay zone.

Opon 3 - Force Zone

• Enabled, the zone can be Force Armed when it is not ready to be Armed. A Force Armed zone

will automacally be included in the alarm processing when the zone restores from the not

ready condion.

• Disabled, the zone is not able to be Force Armed.

Opon 4, 5, 6, 7 and 8 - Reserved

Zone conguraon will not take eect unl the module is next power cycled. This

is because otherwise it is very easy to change a zone seng such that it will then

instantly trigger an alarm and exit the menu mode.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 55 56

Keine Kommentare

Protege EliteSuite Eclipse Installationshandbuch Seite 33